From Wikipedia:

Redscale is a technique of shooting photographic film where the film is exposed from the wrong side, i.e. the emulsion is exposed through the base of the film. Normally, this is done by winding the film upside-down into an empty film canister. The name "redscale" comes because there is a strong color shift to red due to the red-sensitive layer of the film being exposed first, rather than last [the red layer is normally the bottom layer in C-41 (color print) film]. All layers are sensitive to blue light, so normally the blue layer is on top, followed by a filter. In this technique, blue light exposes the layers containing cyan and magenta dyes, but the layer containing yellow dye is left unexposed due to the filter. E-6 (color slide) film has also been used for this technique.

Depending on the type of film used, the resulting colors seem to range from maroon, to red, to orange, to yellow.

Some of my shots are multiple exposure "Redscale+", where I shot the roll normally before respooling the film.